Setup Your HP Printers Easily With 123.hp.com/setup

To start using any printer, you need to complete the printer driver setup for your printer. For the HP printers, you need to complete the setup with 123.hp.com/setup. So, if you have any confusion with the HP printer setup, then you are in the right place. This blog is going to help you in the setup of the HP printer from scratch. There are very simple steps you need to complete with 123.hp.com/setup. So, start completing the steps one by one with this blog and start using your HP Printer.

Steps To Prepare HP Printer For Setup 

To prepare the HP printer for the setup with 123.hp.com/setup, you need to go with the steps mentioned in this section. With the preparation of the printer, you will complete the unpacking and assembly of the printer. Once the printer is assembled, then you can start with the setup of the printer. So, the following are the steps to complete the assembly of the HP printer:

Step 1: Unpack all the packaging material from the printer, and keep it at the plane surface.

Step 2: If the paper feeder tray is not attached, then attach it to the printer.

Step 3: Put the paper bundle in the paper feeder tray.

Step 4: Don’t remove the tapes from the ink cartridge for now.

Step 5: Now, connect the power cable of the HP printer to the power source.

Step 6: Turn on the HP printer by pressing the power button.

Step 7: Wait for some time till the printer comes to an idle state, and it is not making any sound.

Step 8: Then, open the access door for the HP printer to insert the ink cartridges.

Step 9: Handle the ink cartridges very carefully and remove the tape.

Step 10: Now, insert it into the designated slot for the particular color.

Step 11: Close the access door and wait for some time for the printer to come in the idle state.

Step 12: Now, for wireless printing, there is a need to connect the printer with the wireless network. 

Step 13: Press the WiFi button, or go to the Wireless LAN setup on the Control Panel of the HP printer. There can be the availability of the WiFi button depending upon the model of your HP printer.

Step 14: Then, WiFi LED light will start blinking, and the list of the available networks will appear on the display panel.

Step 15: Now, select the name of your wireless network with which your system is connected as well.

Step 16: Enter the password as well if the WiFi is password-protected.

Step 17: Now, on the display panel, you will get the message “connected” after 1-2 minutes, and the WiFi LED will get stable.

So, this completes the steps for the preparation of the HP printer and now you start with the setup process. In the setup of the HP printer, you can start the installation of the printer driver with 123.hp.com/setup.

Steps To Complete HP Printer Setup With 123.hp.com/setup

Now, as you have prepared the printer for the installation of the printer driver for setup. You need to go with the steps mentioned below in order to complete the setup with 123.hp.com/setup. 

Step 1: Don’t connect your printer to the system using a USB cable as you are going to complete the wireless setup.

Step 2: Now, start your system and open the updated Google Chrome.

Step 3: Then, visit 123.hp.com/setup to reach the setup page for the HP printer.

Step 4: Search for the name of your HP printer in the search bar by mentioning the OS as well.

Step 5: Then, the list of the softwares compatible with your system appears on the screen.

Step 6: Select the full-featured printer driver software, and click on the Download link.

Step 7: Wait for the download to get complete. 

Step 8: Now, open the downloaded file and click on the Run button to start the installation.

Step 9: The installation wizard will open, click on the Next button on the Welcome screen.

Step 10: Keep following the on-screen instructions till you finish the last step on the installation wizard.

Step 11: Make sure, in the Connection Method, you need to select the Wireless Method.

Step 12: Click on the Finish button in the last.

Step 13: This will complete the printer driver installed in your system.

Step 14: Now, the next step is to add the printer to your system.

Step 15: After this, open the Control Panel in your system.

Step 16: Then, click on the Devices and Printers option in the Control Panel.

Step 17: Now, click on the Add a Printer link and this will open the list of the printers.

Step 18: Select the name of your HP printer, and click on the Add button.

Step 19: If your printer is not on the list, then select the “My printer is not listed” link.

Step 20: Complete all the manual instructions to add up your printer into the system. 

Step 21: Take the test print from the HP printer.

Therefore, this completes the HP printer setup with 123.hp.com/setup. Now, you can use your printer wirelessly and remotely without any complications.

Complete Guide For HP Printer!

In the bottom line, it can be said, it is a complete guide for the HP Printer setup from the scratch. Here, you will find the complete steps from the printer setup from unpacking to printing with 123.hp.com/setup. So, follow the steps mentioned above and start printing wirelessly with the HP printer. In case, you are not able to access 123.hp.com/setup, or there is any other issue with the HP printer. Then, contact our expert team and get a quick solution to your problem. Lastly, start printing wirelessly with the HP printer.